


Wolf Professional Combination Gas / No Gas MIG 150T Welder with No Gas Kit
Product Code / SKU: 113854
This welder is supplied ready for 'no gas' MIG welding but offers the facility to convert to gas MIG welding with additional accessories (not included). So whilst 'No Gas' MIG welding may be suitable for your current needs, should in the future you need a traditional 'Gas MIG', this machine is easily interchangeable between the two types with a simple polarity change (requiring no tools) and the purchase of some optional accessories.
Supplied with a comprehensive range of accessories for you to start welding, the Wolf MIG 150T welder with its non live torch is a pleasure to use.
It develops a smooth DC output for ease of operation and impressive results. Incorporating 6 selectable power output settings, you can select the best setting for the job in hand. The welding current range can be set from 30 amps to 135 amps. With fully variable wire speed control, you can adjust the wire speed to suit precisely the work. The regular welder will welcome the inbuilt turbo fan cooling system allowing extended welding duty cycles.
The performance of this machine will not fail to impress. If you've never owned a DC output MIG welder before, you've never experienced just how straight forward obtaining good welding results can be.
Note: This welder is supplied without a fitted plug. This is because we only recommend using a 32 amp rated plug due to the amperage draw required, this improves the performance and longevity of the welder components. You can also use a dedicated hard wired supply. We also recommend where possible to use an isolator and independent circuit breaker (rated above 32amp). If in doubt, please contact a certified electrician for additional guidance.
Included:
- 1 x Mini spool of flux cored MIG wire
- 2 x 0.9mm MIG tips
- 1 x spare torch shroud
- 1 x chipping hammer/wire brush
- 1 x hand held face shield to the latest CE safety standards with 350mm of face and hand guarding.
|
Welder Type: MIG Gas/No Gas |
Output Current: 30 - 135 Amps |
|
Maximum Input Current: 26 Amps |
Welding Rod Size: 0.6mm - 5mm |
|
Maximum Welding Thickness: 5mm |
Minimum Welding Thickness: 0.6mm |
|
Power Output: 2800w |
Input Voltage: 230V |
|
Maximum Open Voltage: 20.75V |
Amps at 60% Duty: 43 Amps |
|
Phase: Single |
DC Output: Yes |
|
Turbo Fan Cooled: Yes |
Thermal Overload Protection: Yes |
|
Non Live MIG Torch: Yes |
Power Cable Length: 2m |
|
Plug Type: UK 3-Pin |
Housing Protection: IP21S |
|
Insulation Class: H |
Dimensions (LxWxH): 460 x 270 x 560mm |
|
Weight: 29.5Kg |
Free standard delivery (3–5 working days) is available on UK mainland orders of £100 or more, excluding the Scottish Highlands, which always incur a delivery charge.
Priority delivery (1–2 working days) is offered but is not guaranteed as a next-day service.
Deliveries to the Scottish Highlands will always take 3–5 working days, and certain products cannot be delivered to this location.
Tracking and notifications are provided for all orders, and any damages must be reported within 2 working days of receipt.
Tax included.
For all Standard UK Mainland orders £100 or more.
Protected by PayPal, Klarna & Adyen.
Speak to our friendly team via chat, email, or phone for expert product advice.

